Kolab Server 2.2 Install and Upgrade Information ================================================ (Version 20090407, Kolab Server 2.2.1) See http://kolab.org/ for general information about Kolab, or look at http://wiki.kolab.org/ for specific topics. It is recommended to subscribe to the announcement mailing list at http://kolab.org/mailman/listinfo/kolab-announce to receive security advisories and release announcements. Quick install instructions -------------------------- Kolab server and the Kolab web client (based on Horde) will use about 1GB of disk space for the initial install. By default the directory /kolab will be used, which should be an empty directory or a symbolic link to an empty directory. If this directory does not yet exist, it will be automatically created. For production use it is recommended to create a separate partition for /kolab (2GB to have some spare) and partitions for /kolab/var (at least 2GB for log files, virus filtering and caches) and /kolab/var/imapd/spool (with enough space for your users' mails). For evaluation you could start with the 2GB partition for /kolab (or 2GB free space on / if you only have one big partition for your test system) and create the other partitions when needed. Do _not_ use an NFS mounted drive! Make sure that the following names are not in /etc/passwd or /etc/groups, as OpenPKG will want to create them: "kolab" "kolab-r" "kolab-n" To install the Kolab server, you need to download the files from the directory containing this file (1st.README) to some local directory. You can check the integrity of the downloaded files with: $ gpg --keyserver hkp://subkeys.pgp.net --recv-key 5816791A or import the key from https://www.intevation.de/~thomas/gpg_pub_key.asc $ gpg --verify SHA1SUMS.sig $ sha1sum -c SHA1SUMS Then as root, cd into that local directory and run # sh install-kolab.sh 2>&1 | tee /root/kolab-install.log to build and install packages in /kolab. The command output will be logged to install-kolab.log so that you have a reference in case an error occurs during installation. The install script needs to store some files and creates a subdirectory below /tmp (or $TMPDIR if set) for this purpose. The web client might create much load on your server if there are many concurrent users, so you can choose to not install it by adding the option "-x kolab-webclient" to the call to install-kolab.sh. Installing the web client on a separate host is possible, but not discussed here. If you do not want to install the free/busy view tool, add the option "-x kolab-fbview". The binary packages distributed via kolab.org are compiled with the web client and the free/busy view tool. Currently you need to compile from the source packages to install without these features, see kolab/issue2440 for details. By default, the Kolab server will now be started at boottime, so you have to bootstrap the server configuration now to prevent unconfigured components from being started, see kolab/issue1745 for details. Please run: # /kolab/sbin/kolab_bootstrap -b and follow the instructions. Check http://www.openpkg.org/documentation/ for additional documentation about the OpenPKG packaging system. General update instructions --------------------------- Generally an update of the Kolab server works as described in this section, but often you will need to deviate from these instructions as described in the sections below. Please read the release specific update instructions for all releases newer than the one you already have before you start the update, e.g. for upgrading from 2.2.0 to 2.2.1-rc1 you have to follow the instructions for upgrading from 2.2.0 to 2.2.1-beta1, too. In any case you should completely read *all* relevant update instructions *before* starting the upgrade procedure. Always make sure you have a recent backup of your /kolab directory before you attempt the upgrade. The installation of the new packages works just as for the initial installation. Download the files as described above and run # sh install-kolab.sh 2>&1 | tee /root/kolab-update.log If you installed without kolab-webclient or kolab-fbview you need to add the corresponding -x options again. install-kolab.sh will usually automatically determine which packages need to be built. If you have made changes to configuration files or an updated package includes configuration files which are usually regenerated from files in /kolab/etc/kolab/templates/ the old configuration file will be saved with the extension .rpmsave. For files generated from templates you just have to remove the rpmsave file, because services will refuse to start if there still is an rpmsave file, e.g.: # rm /kolab/etc/clamav/*.conf.rpmsave For other changed files (e.g. the template files themselves) you may want to transfer your changes from the .rpmsave backup to the new files. Then regenerate the configuration and restart all Kolab services with: # /kolab/sbin/kolabconf -n # /kolab/bin/openpkg rc all restart Or alternatively if the Kolab server was stopped before the upgrade: # /kolab/bin/openpkg rc openldap start # /kolab/sbin/kolabconf -n # /kolab/bin/openpkg rc all start Upgrade from 2.2.1-rc1 to 2.2.1 ------------------------------------- Nothing special has to be done for this upgrade. Upgrade from 2.2.1-beta1 to 2.2.1-rc1 ------------------------------------- Nothing special has to be done for this upgrade. Upgrade from 2.2.0 to 2.2.1-beta1 --------------------------------- 0. Make a backup of your installation and data stored inside /kolab 1. The Kolab server must be stopped: # /kolab/bin/openpkg rc all stop 2. Save the current LDAP data: Copy the contents of the openldap database, use a different output filename if you want. You should make sure that no other users can read the sensitive data contained in the ldif file, e.g. with umask (limited to the slapcat call by using parentheses): # (umask 077 && /kolab/sbin/slapcat > ~/kolab-2.2.0.ldif) 3. Start the standard upgrade: (as described in the General update instructions) # sh install-kolab.sh 2>&1 | tee /root/kolab-update.log 4. /kolab/etc/kolab/kolab.conf will be saved as kolab.conf.rpmsave, please move it back to the original name: # cd /kolab/etc/kolab && mv kolab.conf.rpmsave kolab.conf 5. Look at *.conf.rpmsave files in the subdirectories of /kolab/etc/, transfer your changes and remove these files. (as described in the General update instructions) 6. Before starting the LDAP server the database must be restored from the ldif (with Horde preferences filtered out, since these are now stored in files): # rm /kolab/var/openldap/openldap-data/* # /kolab/bin/awk '!/^ / {ok=1;} /^objectClass: horde(Person|Group)$/ {ok=0;} /^([a-z]*Prefs|turba(Contact|Members|PGPPublicKey|Type)):/ {ok=0;} {if(ok) print;}' ~/kolab-2.2.0.ldif | /kolab/sbin/slapadd 7. Start the OpenLDAP, generate the configuration files and start the Kolab server: # /kolab/bin/openpkg rc openldap start # /kolab/sbin/kolabconf -n # /kolab/bin/openpkg rc all start Upgrade from 2.2-rc3 to 2.2.0 ----------------------------- Nothing special has to be done for this upgrade. Upgrade from 2.2-rc2 to 2.2-rc3 ------------------------------- You should regenerated the free/busy cache again, as described in the upgrading instructions from 2.2-rc1 to 2.2-rc2. The IMAP annotation /vendor/kolab/xfb-readable (introduced in 2.2-beta3) was renamed to /vendor/kolab/pxfb-readable-for to reflect the actual meaning. After the upgrade the old annotations are still readable, but unused by the server. If you still need to write this annotation for some reason, you have to add it to imapd.annotation_definitions.template and run kolabconf. Upgrade from 2.2-rc1 to 2.2-rc2 ------------------------------- You have to regenerated the free/busy cache, which now can be done automatically. First (optional, but recommended) step is to remove the current cache below /kolab/var/kolab-freebusy/cache: # su - kolab-n $ rm -r /kolab/var/kolab-freebusy/cache/* Now you can use the following command (still as user kolab-n): $ PHP_AUTH_USER=manager PHP_AUTH_PW='managerpassword' /kolab/bin/php \ -c /kolab/etc/apache/php.ini /kolab/var/kolab/www/freebusy/regenerate.php As this will show the manager's password on the command line, you can alternatively open https://yourserver.example.com/freebusy/regenerate.php in a web browser and login as "manager". This needs "Allow unauthenticated downloading of Free/Busy information" to be disabled, which is the default. Upgrade from 2.2-beta3 to 2.2-rc1 --------------------------------- Updating the free/busy cache has to be triggered for all calendar folders of all accounts: - Users need to create or update an appointment in their folders. - Resources can be invited to a new appointment or send them an update to an existing appointment. Upgrade from 2.2-beta2 to 2.2-beta3 ----------------------------------- After upgrading, you should remove the package "kolab-horde-framework", which is no longer needed: # /kolab/bin/openpkg rpm -e kolab-horde-framework Upgrade from 2.2-beta1 to 2.2-beta2 ----------------------------------- Before running install-kolab.sh, you should stop the running Kolab server and remove some packages which got renamed or will no longer be needed by running this command: # /kolab/bin/openpkg rc all stop # /kolab/bin/openpkg rpm -e --nodeps apache2 apache2-php getopt proftpd \ pth sharutils kolab-horde-fbview kolab-resource-handlers Ignore errors about pth or sharutils not being installed, these were included in the beta1 release but not installed by default. Upgrade from Kolab server 2.1 or before --------------------------------------- Instructions for upgrading from Kolab server 2.0 will be added in a future version of this document. These instructions are for upgrading from Kolab server 2.1.0 to 2.2.1: 0. Make a backup of your installation and data stored inside /kolab 1. Before upgrading the Kolab server must be stopped: # /kolab/bin/openpkg rc all stop 2. Save the current LDAP data: Copy the contents of the openldap database, use a different output filename if you want. You should make sure that no other users can read the sensitive data contained in the ldif file, e.g. with umask (limited to the slapcat call by using parentheses): # (umask 077 && /kolab/sbin/slapcat > ~/kolab-2.1.ldif) 3. Some of the old Kolab packages must be removed to avoid conflicts during the upgrade process: # /kolab/bin/openpkg rpm -e --nodeps \ kolabd kolab-webadmin kolab-horde-fbview kolab-horde-framework \ kolab-resource-handlers getopt patch proftpd sharutils 4. New versions of openpkg and openpkg-tools are needed for the upgrade, so you have to install them manually beforehand. As root, cd into the directory of kolab server 2.2 binary packages and run: # /kolab/bin/openpkg rpm -Uvh \ ./openpkg-20071227-20071227_kolab1.--kolab.rpm # /kolab/bin/openpkg rpm -Uvh \ ./openpkg-tools-1.4.6-20071231.--kolab.rpm If you do not have binary packages for you platform, you have to build them from source first. As root, cd into the Kolab server 2.2 source directory and run: # /kolab/bin/openpkg rpm --rebuild \ ./openpkg-20071227-20071227_kolab1.src.rpm # /kolab/bin/openpkg rpm -Uvh \ /kolab/RPM/PKG/openpkg-20071227-20071227_kolab1.--kolab.rpm # /kolab/bin/openpkg rpm --rebuild ./openpkg-tools-1.4.6-20071231.src.rpm # /kolab/bin/openpkg rpm -Uvh \ /kolab/RPM/PKG/openpkg-tools-1.4.6-20071231.--kolab.rpm ( and must be replaced by the correct values for your system). 5. Start the standard upgrade (as described above): # sh install-kolab.sh 2>&1 | tee /root/kolab-update.log 6. Before starting the LDAP server the database must be restored from the ldif: # rm /kolab/var/openldap/openldap-data/* # /kolab/sbin/slapadd -l ~/kolab-2.1.ldif 7. The format of the TLS session cache changed, therefore you have to truncate it to zero length: # > /kolab/var/imapd/tls_sessions.db 8. /kolab/etc/kolab/kolab.conf will be saved as kolab.conf.rpmsave, please move it back to the original name. # cd /kolab/etc/kolab && mv kolab.conf.rpmsave kolab.conf 9. Remove all *.conf.rpmsave files in the subdirectories of /kolab/etc/ as described above. 10. Start the OpenLDAP, generate the configuration files and start the Kolab server: # /kolab/bin/openpkg rc openldap start # /kolab/sbin/kolabconf -n # /kolab/bin/openpkg rc all start 11. After the successful upgrade some cleanup can be done, by removing obsolete files/directories: # rm -r /kolab/etc/resmgr # rm -r /kolab/etc/proftpd # rm -r /kolab/var/kolab/www/freebusy/cache/* 12. The free/busy cache has to be regenerated for all calendar folders of all accounts, see "Upgrade from 2.2-rc1 to 2.2-rc2" in this file. Additional hints may be available in the Kolab wiki: http://wiki.kolab.org/index.php/Kolab2_Upgrading Direct upgrade from Kolab1 is not supported. We suggest that you back up your IMAP store, install Kolab2 and manually recreate user accounts and then restore the IMAP data from the backup. Known regressions compared to Kolab Server 2.2.0 ------------------------------------------------ The following issues affect the current prerelease, but are expected to be fixed for the final release: kolab/issue3438 (kolabFreeBusyPast is not used) Generating your own 00INDEX.rdf for installations or upgrades ------------------------------------------------------------- The source and binary downloads contain the 00INDEX.rdf file needed by the "openpkg build" command used by install-kolab.sh to install or upgrade a Kolab server. If you already have your own set of binary packages from a previous build, you can use these to create a full binary installer (e.g. to install the packages on a second machine) or or a partial binary installer (for upgrades where you only want to compile the new .src.rpm files instead of everything). To generate this file, you always need all .src.rpm files, so link or copy them in a new directory (needs to be writable by the kolab user of your installation). After this you can link/copy the install-kolab.sh file and your binary rpm files (e.g. openpkg-20071227-20071227_kolab1.*-kolab.rpm from /tmp/install-kolab.*/ and the others from /kolab/RPM/PKG/) into this directory and run the following command as user kolab or root to create the new 00INDEX.rdf file: $ sh install-kolab.sh -X If you want a pure binary installer, you can remove the .src.rpm files now. To be able to use this directory for fresh installations (i.e. not only for upgrades), you need to put the OpenPKG bootstrap file (openpkg-*.src.sh or openpkg-*.--kolab.sh) into this directory, too. Index generation tries to cache information about source RPMs in the file /kolab/RPM/DB/00INDEX-cache.db, you might want to remove it to save some disk space or restore it after new installations to save some time. Known problems and workarounds ------------------------------ - Your system (C library) has to support all languages you want to have available in the web admin interface, the web client and fbview. For most languages you have to use the non-UTF-8 and non-euro locales, i.e. de_DE, fr_FR, it_IT, nl_NL instead of e.g. de_DE@euro. For fbview some languages need a UTF-8 locale, e.g. ja_JP.UTF-8 for Japanese. The web client needs UTF-8 locale in addition to the non-UTF-8 ones in some situations. So it's best to install all variants for every language which shall be supported. See kolab/issue2732 (Horde and Web Admin Interface Language Selection depends on OS locale support) for details. - If login on https://yourserver.example.com/fbview and triggering free/busy regeneration does not work, try as user kolab: /kolab/bin/php -r 'imap_open("{localhost:143/notls}", "" ,"");' If it yields "Segmentation fault (core dumped)", then there probably is a conflict between a dynamically loaded libdb3 from your system and a statically linked libdb4 from the OpenpPKG php package. If it yields a "PHP Warning: ...", this part of the system works correctly. One reason for such a conflict could be the mere presence of /lib/libnss_db.so.*, which is installed on some distributions by default. On Debian systems it is contained in the package "libnss-db". If you really need this library, you could work around the loading of libdb3 by placing a symbolic link with the correct name in /kolab/lib, e.g.: ldd /lib/libnss_db.so.2 libnss_files.so.2 => /lib/tls/libnss_files.so.2 (0xb7f16000) ---> libdb3.so.3 => /usr/lib/libdb3.so.3 (0xb7e6b000) libc.so.6 => /lib/tls/libc.so.6 (0xb7d36000) /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x80000000) ln -s /dev/null /kolab/lib/libdb3.so.3 See kolab/issue1607 (need to replace gdbm for pfbcache, because of license clash gdbm vs php) for details. - /kolab/sbin/kolab_bootstrap -b fails to start the temporary slapd on Linux 2.4 kernels if binaries compiled on Linux 2.6 (as provided on kolab.org) are used. See kolab/issue1795 for details. - Under some circumstance the Kolab server may not create or delete users or update the configuration after changes have been made in the web interface. This happens most often immediately after the bootstrap. In that case restart the kolabd: /kolab/bin/openpkg rc kolabd restart If user accounts are still not created or deleted, you can try removing the file /kolab/var/kolab/mailbox-uidcache.db and restarting kolabd. See kolab/issue1068 (Mailboxes are not created until kolabd restart) and kolab/issue1098 (Changes in the service tab are not accepted after bootstrap) for details. - If modifying or deleting of address book entries doesn't work, restarting openldap can help, see kolab/issue854 for details. - There is a report that the manager can only see users in the primary domain, see kolab/issue1485. We can't reproduce this problem, please tell us if you can. - Calendar folders for group/resource accounts can't be created for domains which were added after bootstrap, i.e. via the web admin interface. See kolab/issue1313 for details. - When deleting domains via the web admin interface, the corresponding LDAP data and IMAP spool stay on the server and have to be deleted manually. See kolab/issue1571 and kolab/issue1576 for details. - A domain maintainer can not always edit the email aliases for a user, even if the user and the alias is in domains the domain maintainer has access to. See kolab/issue2825 for details. $Id: 1st.README,v 1.1.2.6 2009/04/07 13:43:43 thomas Exp $