************************************************************************* * Infortrend PCI RAID Controller Series * * Drivers and Utilities for Solaris 8 (SPARC platform) * ************************************************************************* Version: V1.21G Dear Infortrend customer, In this directory: IAAR121G.tar - Driver for Solaris 8 for SPARC platform. * Limitation * 1. The logical drive created on IFT-2101U/2101U2 RAID controller cannot be used as the Solaris boot drive. Install IFT-2101U/2101U2 Driver and Text RAID Manager for SUN Solaris --------------------------------------------------------------------- A. Copy the driver file " iaar121g.tar " to your one folder such as /usr/xx A1. To unzip the file # cd /usr/xx # tar xvf iaar121g.tar A2. To install the driver from the driver diskette, type: # pkgadd -d /usr/xx where "/usr/xx" is the folder the file irra121g.tar put. A3. A list of selections will show as below, choose "4" to install the driver for IFT-2101U/2101U2. The following packages are available: 1 dascsparc Infortrend RAID In-Band SCSI Driver for Solaris (sparc) 1.11c 2 mgrsprc32 Infortrend Text RAID Manager for Solaris SPARC 32-bits (sparc) 1.52e 3 mgrsprc64 Infortrend Text RAID Manager for Solaris SPARC 64-bits (sparc) 1.52f 4 rhbasprc Infortrend IFT-2101 RAID Host Adapter Driver for Solaris (sparc) 1.11f 5 snmpspk32 Infortrend RAID SNMP SUBAGENT for Solaris SPARC 32-bits (sparc) 1.15g 6 snmpspk64 Infortrend RAID SNMP SUBAGENT for Solaris SPARC 64-bits (sparc) 1.15h Select package(s) you will to process (or 'all' to process all packages). (default: all) [?,??,q]: 4 A4. After the driver installed, the same selections appear again. Choose "3" this time to install the Text RAID Manager for Solaris. A5. After the driver installed, the same selections appear again. Choose "6" this time to install the RAID SNMP sub-agent for Solaris. This step can be ignored if SNMP remote administration is not going to be used. If TCP/IP protocol and SNMP service have not yet installed on this system, it can be installed later after the system TCP/IP and SNMP installed. The RAID SNMP sub-agent is not a must to be installed. Install it only when needed. A6. Choose "q" to quit when the same list of selections appear again. A7. Reboot the system. # reboot -- -r Using Text RAID Manager to Configure RAID ----------------------------------------- 1. Change the current directory to where the Text RAID Manager is located. # cd /usr/lib/raidsnmp 2. Execute the Text RAID Manager under command prompt: # ./raidman Please follow the Instruction manual of IFT-2101U/2101U2 for the detail operation of the Text RAID Manager. ******************* Product/Update Information ******************* For more information about Infortrend and our RAID controller products, please visit our web site: http://www.infortrend.com.tw or http://www.infortrend.com To download the latest firmware and drivers/utilities, please visit our ftp site: ftp://ftp.infortrend.com.tw or ftp://ftp.infortrend.com ******************** Support Information ************************ If you have any technical questions regarding to your RAID system, please contact your RAID system supplier first, they will provide the latest information and sincere support. ******************** Suggestions? Comments? ********************* Suggestions and comments to Infortrend RAID controller products, please send e-mail to: support@infortrend.com.tw Thank you!! Your comments are most welcome - Infortrend Development Team.