[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [bluetooth] Re: hi
Hi,
Iam already working on implementingthedatapath blocks in verilog,yes jamil
have your design document...my university here has SMV..so my proffessor
has proposed that once the hardware ois ready we can model check the
design.but i need some help in implementing it in verilog.
On Sun, 20 Apr 2003, Jamil Khatib wrote:
>
> Hi all,
>
> It seems that there is a great interest in this project so I think it the
> best time to get it back to live.
> Do you have any suggestion?
>
> The last time I worked in the project I published the design document which
> is available in the bluetooth page. It still need some review, feedbacks and
> some sections to add.
> Here are teh main points that must be done:
>
> - To add the micro sequencer logic for the core controller
> - review the timing logic.
> - review teh registers.
> - Review the RF interface and available RF chips
> - Implement teh datapath blocks in VHDL.
>
> Please notify me if you are interested on this mailing list after you read
> the design document. Let us organize ourselves and define who is goign to
> implement which block.
>
> Regards,
> Jamil KHatib
>
>
>
>
> On 4/19/2003, "Puloma Mukherjee" <[email protected]> wrote:
>
> >Hi,
> >Before this some one wrote to me to help me witht he project.I forgot who
> >it was.please write back to confirm.
> >
> >On Fri, 18 Apr 2003 [email protected] wrote:
> >
> >>
> >> Hi .
> >> I have done VHDL before. So I am not sure If I can be of any help. In
> >> case this project is not completely dead. Email me back ..
> >> regards,
> >> Roland Tannous
> >> ----- Original Message -----
> >> From: "Jamil Khatib" <jamilkhatib@h... >
> >> To: bluetooth@o...
> >> anilnainwal@o...
> >> Date: Tue, 08 Apr 2003 05:32:55 GMT
> >> Subject: [bluetooth] Re: hi
> >>
> >> >
> >> >
> >> >
> >> > Hi,
> >> > In fact the project is freezed because I need someone to work
> >> > with me on it specially in hte VHDL coding. Can you help?
> >> >
> >> > Regards,
> >> > Jamil KHatib
> >> > anilnainwal@o... writes:
> >> >
> >> > > hi everbody
> >> > > Can anyone tell me the present status of the bluetooth core. i
> >> > would like
> >> > > to join the group for the development of bluetooth.
> >> > > pls tell me the status, i would like to work anywhere in the
> >> > baseband.
> >> > >
> >> > > best regards
> >> > > anil nainwal
> >> > >
> >> > >
> >> >
> >> --
> >> To unsubscribe from bluetooth mailing list please visit
> http://www.opencores.org/mailinglists.shtml
> >>
> >
> >--
> >To unsubscribe from bluetooth mailing list please visit
> http://www.opencores.org/mailinglists.shtml
>
--
To unsubscribe from bluetooth mailing list please visit http://www.opencores.org/mailinglists.shtml