[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [bluetooth] FH Selector implementaion query...
Hi all,
I got the results from myself.........(See Below).Hope it will help for someone who are
interested in the implementation.
Anyway,thank you for attention.
Best Regards
----- Original Message -----
From: ccsin@k...
To: ccsin@k... , bluetooth@o...
Date: Tue, 13 May 2003 04:46:50 -0100
Subject: Re: [bluetooth] FH Selector implementaion query...
>
>
> Hi all,
>
> I am facing some problem on FH selector.
>
>
> 1.Are Y1 and Y2 1-bit input??If yes,how come the CLK1 * 32 (this
> might need 6-bit
> input)?
Y1 need to be appened to 5-bit.
Y2 is 6-bit based on the multiplication result
>
> 2. Does the Y1 input need to be appended to 5-bit before xor with
> input C??
>
> Example: if Clk1=1,
> then Y1 = "11111" xor C
COrrect!!
>
>
> 3. What about the case for Y2,
> example: if Clk1 =1
> then Y2 = "100000"
> Adder2 = E[6:0] + F[6:0] + PERM5_out[4:0] + 6'100000
>
> Is the Y2 input for the Adder2 correct???
Correct!!
>
> Hope someone can help me.
>
> Best Regards
>
>
>
> ----- Original Message -----
> From: ccsin@k...
> To: bluetooth@o...
> Date: Tue, 6 May 2003 06:41:55 -0100
> Subject: [bluetooth] FH Selector implementaion query...
>
> >
> >
> > Hi Jamil,Anilnainwal,
> >
> > I got few queries on FH selector implementation,refer to the
> > "Bluetooth IP core spec"
> > on section 2.10.
> >
> > 1. What is the purpose of the "Valid" port??
> >
> > 2. I suggest to add a "Train" input-port for this block.if
> train =
> > 1, offset =24 is
> > used,however if train = 0,offset = 8 is used.Without this
> "train"
> > port,it's hard to
> > determine what is the offset value to be used and for how long
> that
> > according to the
> > Ninquiry and Npage(since we do not know these Ninq/Npage in
> this
> > block).Is my
> > concept ok??correct me if i'm wrong,since I'm currently
> > implementing this block.
> >
> > 3.Another input-port might be needed,which is "Reset",this
> reset
> > can be used to reset
> > some "Registers" in this block,like "Nreg",which is a counter
> in
> > Page and Inquiry
> > Response.
> >
> >
> > Hope to get Feedback from you ASAP.
> >
> > Best Regards,
> >
> > Chuan Chew
> >
>
--
To unsubscribe from bluetooth mailing list please visit http://www.opencores.org/mailinglists.shtml