[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [oc] Wishbone master multiple slave problem
Thanks you Richard, thank you Patrick ;-)
Dani
Am Mon, 09 Jul 2001 schrieben Sie:
> >Hi folks,
> >
> >Can anybody explain to me, how one wishbone master must be interfaced to
> >multiple slaves. Is this done in the slave vhdl code or is a multiplexer
> >of the
> >strobe signal used in the connection between master and slaves?
>
> It's done by modifying the strobe signal (STB) in the connection between
> the master and the slaves. Use a decoder (address-decoder) instead of a
> multiplexor. AND (logical AND) the decoder outputs with the strobe signal.
>
> Richard
>
> >I'm working on a
> >openhardware project at www.openhardware.net/Dragonix/index.php and we
> >have started to implement a simple master that will be mapped into the 68k
> >microprocessor memory space.
> >
> >best
> >
> >regards
> >
> >Daniel Haensse
> >--
> >To unsubscribe from cores mailing list please visit
> >http://www.opencores.org/mailinglists.shtml
>
> --
> To unsubscribe from cores mailing list please visit http://www.opencores.org/mailinglists.shtml
--
**********************************************************
Daniel Haensse
Dipl. Ing. ETH
Klinik fuer Neonatologie
UniversitaetsSpital Zuerich
Frauenklinikstr. 10
8091 Zuerich
Switzerland
Tel: ++41 / 1 / 255 5342
Fax: ++41 / 1 / 255 4442
email: [email protected]
--
To unsubscribe from cores mailing list please visit http://www.opencores.org/mailinglists.shtml