[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [oc] Hardware
Hi folks,
I made a byteblaster clone. I don't know if this is what you looking for, but
if somebody is interested, I can send the protel files and generate gerber of
it. Check www.dragonix.net.
Dani
Am Montag, 25. Februar 2002 19.56 schrieben Sie:
> The xilinx parallel III download cable is only $99. You can order it
> from any of the big distributors that carry Xilinx (Avnet, Arrow,
> Nu-Horizons, Insight). BTW, the parallel cable is faster than the more
> expensive USB version.
>
> Regards,
> Manoj
>
>
> -----Original Message-----
> From: [email protected] [mailto:[email protected]]On
> Behalf Of David Feustel
> Sent: Monday, February 25, 2002 8:18 AM
> To: [email protected]
> Subject: Re: [oc] Hardware
>
>
> Cygnal ( http://www.cygnal.com <http://www.cygnal.com> ) uses a
> serial-to-jtag converter with its
> 8051 development kits. Perhaps you could adapt that device to your
> project.
>
> ----- Original Message -----
> From: Shaun <mailto:[email protected]> Seow
> To: '[email protected]' <mailto:'[email protected]'>
> Sent: Monday, February 25, 2002 2:36 AM
> Subject: RE: [oc] Hardware
>
>
> Corelis USD12K
>
> -----Original Message-----
> From: Matts Kivik [ mailto:[email protected]
> <mailto:[email protected]> ]
> Sent: Thursday, February 21, 2002 6:07 PM
> To: [email protected] <mailto:[email protected]>
> Subject: RE: [oc] Hardware
>
>
> Ok, this web-pack ISE software from xilinx sounds interesting.
> Can you recommend a suitable JTAG programmer at a good price ?
>
> Is there no way to download the program via a serial connector or
> something, I am afraid that the JTAG-programmer is expensive ?
>
> --- "Thilo Jeremias" <[email protected]> wrote:
> >I think, that the wrong question,
> >it all depends on your constraints:
> >price per unit,
> >power requirements
> >performance needs.
> >
> >(ahh and of course personal preferences -- like apple & PC)
> >
> >you get JTAG-HW+ chips + software from: micrel,altera,xilinx,cypress
>
> and
>
> >others....
> >you can get dedicated SW (in the range up to some 100k$) from mentor
>
> and
>
> >others.
> >
> >A cheap & relativly easy to start with kit is: xilinx web-pack ISE
> >www.xilinx.com (for free)
> >but the bigger virtexes are fairly expensive though and you prbably
>
> need to
>
> >buy SW then...
> >
> >did that confused you ?
> >
> >:-)
> >
> >Thilo
> >
> >> -----Original Message-----
> >> From: [email protected] [ mailto:[email protected]
>
> <mailto:[email protected]> ]On
>
> >> Behalf Of Mark
> >> Sent: Tuesday, January 29, 2002 1:51 AM
> >> To: [email protected]
> >> Subject: [oc] Hardware
> >>
> >>
> >>
> >> What are some common chips and programmers you guys use in
> >> testing/implementation.?
> >>
> >>
> >> --
> >> To unsubscribe from cores mailing list please visit
> >
> > http://www.opencores.org/mailinglists.shtml
>
> <http://www.opencores.org/mailinglists.shtml>
>
> >--
> >To unsubscribe from cores mailing list please visit
>
> http://www.opencores.org/mailinglists.shtml
> <http://www.opencores.org/mailinglists.shtml>
>
> _____________________________________________________________
> Want a new web-based email account ? ---> http://www.firstlinux.net
> <http://www.firstlinux.net>
--
To unsubscribe from cores mailing list please visit http://www.opencores.org/mailinglists.shtml