[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [ethmac] miim question
After the AN completed, you can read the PHY status register to get such
kind of information.
> ----------
> From: lxn[SMTP:[email protected]]
> Reply To: [email protected]
> Sent: Wednesday, May 08, 2002 8:47 AM
> To: [email protected]
> Subject: [ethmac] miim question
>
> Hi,everyone,I have a question that need your reply.
> Before the mac core begin to work, I think it is necessary for me to know
> the phy status. So how can I know the phy status? which speed ,10M or
> 100M,and which duplex ,full or half-full, the phy is working on?
> Someone says that the status can been got by reading the phy registers,
> but I still can't understand. For example , I'd like the phy to work at
> auto-negotiation mode, so I write the control data 16'h1000 to phy contrl
> reg, but how can I get the phy working status next step.
> Thanks for your help.
> Regards,
> panic
>
>
> =============================================================
> �����¶��ţ���VIP���䣡
> ������վ���� ӯ���������� ��
> ������ ��һ����������
>
>
--
To unsubscribe from ethmac mailing list please visit http://www.opencores.org/mailinglists.shtml