[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Re: [pci] Newcomer to PCI
>>>>> "Stefan" == Stefan Bergstr,Av(Bm writes:
Stefan> A modern MoBo only drives the PCI signals to 3.3V but are 5V
Stefan> tolerant. It is safe to use a 3.3V chip as long as you make
Stefan> sure you don�t insert another board that will drive the signal
Stefan> levels to 5V. Just put your oscilloscope to your PC and you will
Stefan> see.
Stefan> Have Fun STB
>> -----Ursprungligt meddelande----- Fr,Ae(Bn: [email protected]
>> [mailto:[email protected]] F,Av(Br [email protected] Skickat: den
>> 13 maj 2003 06:46 Till: [email protected] ,AD(Bmne: Re: [pci] Newcomer to
Stefan,
please don't attach the whole thread below your contribution. That way
clutters up the archives and makes them unusable on the long run.
Bye
--
Uwe Bonnes [email protected]
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
--
To unsubscribe from pci mailing list please visit http://www.opencores.org/mailinglists.shtml