[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [oc] compactflash/PCCARD-Interface
At 13:10 05/08/2003 +0200, you wrote:
>At 12:42 05/08/2003 +0200, you wrote:
>>At 10:22 05/08/2003 +0200, you wrote:
>>>At 12:53 04/08/2003 +0200, you wrote:
>>>> > I've done a Core that attachs a Compact Flash to a Wishbone
>>>> > interface
>>>> > reading the first file (FAT16) that have been saved on the CF.
>>>> > It uses two Picoblazes (one for ATAPI-SECTOR PROCESS. and
>>>> > the other for FAT16 processing) so it�s directly available for
>>>> > Xilinx devices (now running on a Spartan II). It is very efficient
>>>> > in terms
>>>> > Armando
>>>>
>>>>could you please post this full project somewhere, its quite interesting,
>>>>and yes using multiply PicoBlazes does save area sometimes :)
>>>
>>>Ok, i'll request place for this project at OpenCores.
>>
>>I see that are already a compactflash interface project currently open in
>>OC web
>
>Yes, but the Core i proposed its not only an interface. It processes ATAPI
>protocol for
>LBA sector reading and also the FAT16 volumes (cluster tracking, MBR, etc.).
But is less implement it in software.
The OCIDEC core are a ATA controller, you can use it for interface ATA
devices, in compactflash/PCCARD-Interface.
>>>Armando
>>
>
>
>--
>To unsubscribe from cores mailing list please visit
>http://www.opencores.org/mailinglists.shtml
--
To unsubscribe from cores mailing list please visit http://www.opencores.org/mailinglists.shtml